Blocking Pressured Water | Emulzer - تقنيات العزل السائل أمولزير -Waterproofing since 1935

Applications » Blocking Pressured Water

Applications

» Waterproofing Elevator Shafts

» Blocking Pressured Water

» Waterproofing Damp Environments such as Bathrooms, Kitchens and Toilets in the Construction Phase

» Waterproofing Damp Environments such as Bathrooms, Kitchens and Toilets after the Application of Cer

» Waterproofing and Dampproofing Basements from Inside (Concrete or Plastered Surfaces)

» Waterproofing and Dampproofing Basements from Inside (Brick, Briquette, Gas Concrete, etc. Surfaces)

» Eliminating Water Leakage at the Floor/Wall Intersections of Basements

» Waterproofing Foundations with the Wrapping Method

» Waterproofing BTB-Glass Mosaic Coated Façades

» Waterproofing Dilatation Joints (Hot Application)

» Waterproofing Secret Gutters (1)

» Waterproofing Secret Gutters (2)

» Waterproofing Concrete Joints in Pools

» Waterproofing Pool Concrete

» Waterproofing Fixture Inlets/Outlets in Pools

» Waterproofing Pools from Outside

» Waterproofing Pools in the Construction Phase from Inside

» Waterproofing Blind Facades

» More About Permo Chim Crystal

» How to Protect Polyurethane Thermal Insulation Coatings

» How to Protect the Facia of Polyurethane Sandwich Panels

» Waterproofing (Concrete or Plastered) Water Tanks from Outside (to Prevent Water from Entering from

» Leakproofing (Concrete) Water Tanks from Outside

» Leakproofing Water Storage Tanks from Inside (Cement Based Insulation)

» Leakproofing Water Storage Tanks from Inside (Polyurethane Based Insulation)

» Invisible Waterproofing in Historical Buildings

» Transparent Waterproofing for Decorative Surfaces such as Stone, Brick and Terracotta

» Waterproofing Foundation Walls from Outside (Unplastered, Dry-Laid Walls)

» Waterproofing Terrace Gardens and Underground Car Parks

» Waterproofing (Walk-on) Terrace Roofs (with Thermal Insulation)

» Waterproofing (Walk-on) Terrace Roofs (with Thermal Insulation)

» Waterproofing Terrace Roofs (without Foot Traffic and Thermal Insulation)

» Waterproofing Terrace Roofs (without Foot Traffic and with Thermal Insulation)

» Waterproofing (Ceramic Coated) Terrace Roofs

» Rain-proofing yourself :)

» Preventing the Humidity Caused by Condensation

Blocking Pressured Water

Blocking Pressured Water

- To decrease water pressure, the leaking holes are deepened enough to provide easy water flow by using a drill. - If there are more than one leakage points, more holes big enough to allow easy water flow are drilled on the lower parts of the wall. - A thin plastic pipe is fixed into the hole by using plugging mortar, and in this way all the water flow is directed into these pipes. - After having cleaned the holes thoroughly, PERMO CHIM CRYSTAL grout is applied into the holes in one coat. - The hole is completely plastered with PERMO CHIM CRYSTAL plaster (all around the plastic pipe) when the PERMO CHIM CRYSTAL grout is still wet. The curing period will be 24 hours. - After having completed the waterproofing application of the surface except the holes, the pipe is removed and the remaining hole is plugged with EMULZER SPEED-X POWDER which is a perfect accelarated setting powder. - The plugging mortar is pressed manually (it is strictly recommended to wear gloves) for about 1-2 minutes until it solidifies. - When PERMO CHIM CRYSTAL mortar is cured, the insulation is completed by applying PERMO CHIM CRYSTAL grout both into and arond the hole.